3D-printed training aids

Resistance Medicine
Printworks

A living repository of printable training aids for medical interventions, maintained by contributors to Resistance Medicine: A Medical Annex to the Resistance Operating Concept. Add a model to the repository and this page rebuilds itself.

“Medicine is resistance, and resistance is hope.” — from the Annex foreword

8 hosted models · 51 external resources · how to contribute

AirwayVascular accessThoracicHemorrhage & wound careUltrasound phantomsRegional anesthesiaHead & spineGeneral resourcesWorkshop basicsWanted

01Airway

C.U.T. Cricothyrotomy Trainer preview
In this repo

C.U.T. Cricothyrotomy Trainer

Surgical cricothyrotomy

Reusable neck-and-larynx trainer built so facilities can run repeated cric training without burning expensive commercial replacement skins. Full anatomical neck unit with realistic landmarks, a flexible cartilage overlay, and a parts tray. Mirrored here in full under its public-domain license.

Print: 0.3 mm layers, 16 percent or greater infill. Neck unit and tray in PLA, no supports. Cartilage overlay in flexible TPU (NinjaTek Cheetah recommended), with supports.
SpragClutch, mirrored from Printables under CC0

build_guide.pdf (297.4 KB) · cartilage_overlay.stl (1.8 MB) · neck_unit.stl (26.4 MB) · tool_tray.stl (118.2 KB)

Cric Airway Trainer preview
MakerWorld

Cric Airway Trainer

Cricothyrotomy training model for physicians and paramedics; vinyl tape serves as the cricothyroid membrane. By HealthcareSim Guy, CC BY 4.0.

Thingiverse

CICO Rescue Cricothyroidotomy Trainer

Free neck-and-larynx combination trainer built to accompany the Vortex Approach CICO teaching material (vortexapproach.org). By drandybuck, CC BY-NC-ND 4.0. Start of the CICO lineage that ends in the NZ CPG v2.4 listed above; frankvdh's V2 remix (thing:2775062, CC BY-SA) adds support-free printing and a full airway lumen.

OTO Open (journal)

High-fidelity cric trainer (validated)

Peer-reviewed 2026 study of a 3D-printed airway model layered with porcine soft tissue; trainee confidence rose significantly. The three STL files are free downloads under "Additional Files" on the article page. Schlegel, Tekumalla et al., Thomas Jefferson University, CC BY-NC-ND 4.0.

JETem (journal)

Pediatric needle-cric scaling guide

Open-access recipe for printing neonatal, school-age, and adolescent needle cricothyrotomy trainers by scaling an adult model to 25, 33, and 50 percent, with neonatal dimensions anchored to cadaveric measurements. Article CC BY 4.0; the base STL comes from The Airway App template library.

INCISA FN-1 Cricothyrotomy Trainer preview
MakerWorld

INCISA FN-1 Cricothyrotomy Trainer

Modular front-of-neck-access task trainer developed with the Kentuckiana Prehospital Education Consortium (KPEC). A printed neck base holds a soft TPU larynx and trachea under replaceable latex skin, with four airway variants and a BVM port. By OffShiftDesign, MakerWorld Exclusive License (free to print via MakerWorld; no redistribution).

CICO + Tracheostomy Trainer v2.4 preview
MakerWorld

CICO + Tracheostomy Trainer v2.4

The most evolved print of the Vortex CICO lineage. The New Zealand Clinical Printing Group (anaesthetists and ICU clinicians) unified their independent CICO trainer designs into one model, and this remix adds Bambu print profiles. Includes an alternative TPU larynx/trachea with a tracheostomy port, so blocked-trach and trach-change drills can be run alongside front-of-neck access. Original instructions PDF included. By Penfoolery after NZ CPG, MakerWorld Standard Digital File License (free to print; files not redistributable).

Thingiverse

Intubation Trainer with graded difficulty

Two-part exterior mold plus three interchangeable airway cores — easy, medium, and hard — for pouring silicone intubation trainers. The hard core adds tonsils, a narrow airway, an obstructing epiglottis, and an anterior trachea, so a program can run a real difficulty progression. Takes about 40 oz of silicone per pour. By gschappelle, CC BY-SA 4.0.

Abdominal Thrust (Heimlich) Training Model preview
MakerWorld

Abdominal Thrust (Heimlich) Training Model

Mechanical demonstrator for the Heimlich maneuver — simulated airway obstruction pops free under correctly aimed abdominal thrusts, teaching the expulsion principle before manikin practice. By muratgokduman, CC BY-NC 4.0.

Anti-Choke Trainer (adult + pediatric) preview
MakerWorld

Anti-Choke Trainer (adult + pediatric)

All-TPU training version of a suction anti-choking device with adult and pediatric mask variants, printed support-free with a 0%-infill seal lip so the mask seats softly on a manikin face. By PhantomCommit, MakerWorld Standard Digital File License (free to print; files not redistributable).

Thingiverse

DIY Video Laryngoscope (training)

Printed laryngoscope handle that takes a sub-10-euro USB endoscope camera, making a functional video laryngoscope for about 15 euros — built for tutoring and airway training where commercial VL is unaffordable. Derived from the airangelblade.org project with the original designer's blessing. By 30-1 (the IO trainer designer listed under vascular access), CC BY 4.0.

EMCrit

Wearable Cric Trainer

Strap-on cricothyrotomy trainer worn by a live role-player, so the student manages a moving patient, not a block on a table. Build instructions at the link; the hosted STL link has been unreliable for years (dead as of Nov 2026), which is part of why this repository exists.

Shared in the Med Annex working group

02Vascular access

Thingiverse

Intraosseous Access Training Device

Printable proximal tibia IO trainer. Designer recommends PLA at 40 percent infill for the tibia and 70 percent for the cover; infill sets the cortical "give". By 30-1, CC BY 4.0.

Shared in the Med Annex working group

IV Trainer Access Trainer preview
MakerWorld

IV Trainer Access Trainer

Strap-on venous access trainer with rails for threading elastic or velcro to secure it to a live role-player's arm or leg; an old infusion line serves as the vein. 180+ ratings. By 3DMillo, MakerWorld Standard Digital File License (free to print; files not redistributable).

IV Trainer Pro preview
MakerWorld

IV Trainer Pro

Compact venous access block for IV placement and infusion practice, built for skills labs that can't justify commercial training arms. By Leo Maggi, MakerWorld Standard Digital File License (free to print; files not redistributable).

VeinGuide Venipuncture Training Arm preview
MakerWorld

VeinGuide Venipuncture Training Arm

Part-task venipuncture and blood-draw arm. Latex tubing veins sit under 1 mm tattoo-practice skin tensioned drum-tight by printed clamps and thumbwheels, so vein location, anchoring, insertion, and flashback all feel right. By 469 Franklin Workshop, CC0 public domain (mirrorable).

NIH 3D

OpenHumerus IO Access Trainer

Open-source humeral head IO access trainer, the proximal-humerus companion to the designer's OpenTibia model. A reusable base holds small replaceable humeral-head inserts so the model restores cheaply after several access attempts; 5-6 layers of foam medical tape simulate the dermis. By Brooks Dillahunty, CC BY-NC-ND 4.0.

NIH 3D

Umbilical Vein Catheterization Trainer

Low-cost neonatal umbilical venous catheterization task trainer. Reusable silicone body, a replaceable cannulatable three-vessel cord, and a fluid reservoir cover vessel identification, catheter insertion, aspiration, and fluid administration without a full neonatal manikin. By irenejunmd, CC BY-NC 4.0.

Thingiverse

OpenTibia IO Access Simulator

Open-source tibial IO trainer with a removable panel over the insertion site, created for inexpensive training in developing-country medical communities and field-proven in Haiti. The tibial companion to the OpenHumerus trainer listed here, by the same designer. By Bdillahunty (Brooks Dillahunty), CC BY-NC-ND 4.0.

Distal Femur IO Trainer preview
Printables

Distal Femur IO Trainer

Distal femur IO access trainer with a replaceable hatch, completing the IO site set alongside the tibial and humeral trainers listed here — the distal femur is the preferred pediatric alternate site. By Miles L, CC BY-NC-SA 4.0.

03Thoracic

Chest Tube Trainer (rib model) preview
MakerWorld

Chest Tube Trainer (rib model)

Rib structure with silicone skin overlay for thoracostomy and chest tube placement; works standalone or strapped over an existing manikin. Derived from the Thingiverse rib section also listed here. By HealthcareSim Guy, CC BY-SA 4.0.

Thingiverse

Chest Tube Simulator (rib section)

Printable rib section for finger thoracostomy, chest tube, and needle decompression landmark practice. Overlay with gelatin, foam, or pork belly for tissue feel. By 2theRescue, CC BY 4.0.

Shared in the Med Annex working group

Pneumatic Thoracostomy Sim Trainer preview
MakerWorld

Pneumatic Thoracostomy Sim Trainer

Active pneumothorax trainer that installs inside a standard CPR manikin. Embedded solenoids, pressure sensors, and an ESP32 give real air-puff feedback for needle decompression and finger thoracostomy. By OffShiftDesign, CC BY-NC-SA 4.0.

GrabCAD

Pericardiocentesis Teaching Model — blind (subxiphoid)

Printable rib-and-landmark model for blind subxiphoid pericardiocentesis, from an Albany Medical Center emergency medicine team. The companion peer-reviewed build guide (Lord, Lord & Geary, Clin Pract Cases Emerg Med 2021, CC BY 4.0) covers assembly and the gelatin pericardial sac. Files are free downloads with a GrabCAD account. By Garrett Lord, Spencer Lord MD, and Sean Geary MD.

GrabCAD

Pericardiocentesis Teaching Model — ultrasound-guided

Ultrasound-guided companion to the blind subxiphoid model above, echogenic enough for probe-guided needle practice on the same low-cost build. Same Albany Medical Center team and CC BY 4.0 companion paper; files free with a GrabCAD account.

04Hemorrhage & wound care

Wound Packing Trainer Mold — bullet preview
MakerWorld

Wound Packing Trainer Mold — bullet

Mold for casting a durable silicone wound-packing trainer with realistic depth and resistance, built for Stop the Bleed and trauma courses. By HealthcareSim Guy, CC BY-SA 4.0.

Embedded Object Arm Simulation preview
MakerWorld

Embedded Object Arm Simulation

Paramedic-designed penetrating-injury arm with an embedded object, for teaching the don't-remove-stabilize response. The only open trainer found for impaled-object management. By DIMENSIONYX, MakerWorld Standard Digital File License (free to print; files not redistributable).

Thingiverse

Surgical Knot Tying Trainer

Knot bench with lace posts for practicing surgical knot tying with suture, string, or shoelace; suction cups fix it to a table. From the designer of the chest tube simulator listed under thoracic. By 2theRescue, CC BY-NC 4.0.

LMU Klinikum (Munich)

SuSiPed suture pad molds and build guides

Pediatric surgery teaching program publishing free STL molds, blockers, and holders for cast silicone suture pads, with step-by-step casting instructions in English. License unstated; link only.

Surgical Suture Pad Mold preview
MakerWorld

Surgical Suture Pad Mold

One-piece mold for casting silicone suture pads for laceration repair practice. Simpler than the LMU SuSiPed system and carries a clear open license. By MedLit Inovation, CC BY-SA 4.0.

05Ultrasound phantoms

In this repo

Fascia iliaca / PENG block ultrasound phantom

Ultrasound-guided regional anesthesia (fascia iliaca and PENG blocks)

3D-printed hemipelvis cast in ballistic gelatin with cord nerve bundles, tubing vessels, and plastic-wrap fascial planes. Build guide in README; print files pending.

Print: PLA hemipelvis, anterior half only. Print small plugs to seal vessel tubing.
Working group contribution, October 2026

Ultrasound IV Trainer (gel phantom) preview
MakerWorld

Ultrasound IV Trainer (gel phantom)

Reusable ultrasound-guided IV access trainer. The printed cavity takes an agar pour with a latex-balloon vessel, plus "seek and find" target objects for probe-skills practice. By OffShiftDesign, CC BY-NC-SA 4.0.

Ultrasound Puncture Trainer preview
MakerWorld

Ultrasound Puncture Trainer

Low-budget reusable ultrasound IV access trainer; agar-agar gel is cheap, melts down for re-pours, and discards into biological waste. By David, CC BY-NC 4.0.

Ultrasound Cannula Phantom preview
Printables

Ultrasound Cannula Phantom

Simple printed phantom for ultrasound-guided cannulation skills. By glfharris, CC BY-NC-SA 4.0.

Thingiverse

Ultrasound SIM Probe (scenario prop)

Dummy ultrasound probe for scenario-based simulation, so students rehearse probe handling and exam flow without risking a real transducer. By 2theRescue, CC BY 4.0.

ALiEM (IDEA series)

Ultrasound-Capable Central Line Trainer

Head-and-neck central line trainer for about $80 in materials — a printed head with emphasized sternocleidomastoid and clavicle landmarks takes a ballistic-gel neck insert from the included mold, with latex tubing vessels and an optional syringe for arterial pulsation on ultrasound. Head and mold files are in the linked public Google Drive. By Taylor Fischer PA-C (Wingate University); files' license unstated, link only.

J Ultrasound Med (UCL)

Wall-less vessel phantom construction (paper)

Peer-reviewed method for building vascular phantoms from printed chambers filled with agar, forming vessels by pulling out rods after the set — wall-less lumens image cleaner than embedded tubing. Free accepted manuscript at the link; the STL chamber files ship with the journal version. Nikitichev et al., 2016.

06Regional anesthesia

Thingiverse

Neuraxial Trainer (spinal + epidural)

Lumbar spine T12-S1 segmented from deidentified CT for spinal and epidural simulation, with a supporting peer-reviewed publication (doi 10.2217/3dp-2017-0007). Embed in gel for a complete neuraxial phantom, or pair with the UCSF lumbar puncture simulator under Head & spine. By 3DMedLab, CC BY 4.0.

Thingiverse

Paravertebral Block Trainer

Thoracic spine T5-T9 with ribs attached, CT-segmented, uploaded at the request of other training centers. The base model behind the ESP block trainer listed here. By 3DMedLab, CC BY 4.0.

Thingiverse

Erector Spinae Plane (ESP) Block Trainer

Right T5-T8 transverse processes with rib stubs, trimmed from the 3DMedLab paravertebral model so the rib-to-transverse-process transition is visible for ultrasound landmarking. ESP blocks cover rib fracture and thoracic wall pain with a single fascial plane injection, which makes this one of the highest-value austere analgesia skills to train. By fluxamnesia, CC BY-SA 4.0.

Thingiverse

Median Nerve Block Model

Pour mold for a forearm phantom with suspended artery and nerve analogs in ballistic gel, with a full bill of materials and assembly steps on the page. Covers ultrasound-guided median nerve block for hand and wrist injuries. By matt_grzywinski, CC BY-SA 4.0.

07Head & spine

Burr Hole Model preview
MakerWorld

Burr Hole Model

Emergency burr hole task trainer built to train emergency medicine residents. A printed skull holds a bag of "blood" over the brain; only the small bone insert reprints after each drill, and a silicone or clay sheet serves as scalp. By maureen.nemetski, CC BY-NC-SA 4.0.

NIH 3D

UCSF Lumbar Puncture Simulator

Cost-effective lumbar puncture and intrathecal access simulator from the UCSF Makers Lab — 3D printed components plus silicone-cast tissue, designed to pair with the freely available "Articulating Lumbar Vertebrae" model by DaveMakesStuff. By ucsfmakerslab, CC BY-NC 4.0.

JETem (journal)

Gelatin eye model set (lateral canthotomy)

Open-access recipe for cheap gelatin eye models that drop into an existing 3D-printed face model, covering lateral canthotomy plus foreign body removal, fluorescein staining, and tonometry practice. No printable canthotomy trainer exists on any open platform (swept Nov 2026), so this VCU build guide is the lane's best open resource. Maupin et al., CC BY 4.0.

Thingiverse

Pediatric Otic & Nasal Foreign Body Trainer

Validated task trainer for ear and nose foreign body removal — a printed 5-year-old-scale head with a tiltable base takes snap-in silicone ears and nares cast from the included molds (Ecoflex 00-30). Under $25 in materials, about $3 per replacement part, no visible wear after 50+ users. From a UT Southwestern / Texas Children's team. By DrLith (Lith Nasif MD et al.), CC BY-SA 4.0.

Thingiverse

Peritonsillar Abscess Drainage Trainer

Oral cavity insert that teaches peritonsillar abscess drainage — paint the printed pieces, load a balloon of hair conditioner as the "pus," and mount the assembly in any head form (the designer used a Halloween mask filled with expanding foam). By drmike15, CC BY-NC 4.0.

Cureus (journal)

TMJ Dislocation Reduction Trainer (build guide)

Peer-reviewed build guide for a jaw dislocation reduction trainer costing under $20 — a printed skull and mandible (free Thingiverse skull, thing:819046) joined with hardware-store screws, with elastic bands standing in for masseter and pterygoid tension. Adjustable resistance, about two days of printing and an hour of assembly. Shin, Wang & Huang, CC BY 4.0.

08General resources

Google Drive

Working group 3D printing drive

Shared collection of medical print files gathered by the working group. Candidates for mirroring into this repository as licensing is confirmed.

Shared in the Med Annex working group

NIH

NIH 3D Print Exchange

Large open library of biomedical and anatomical models, many with open licenses suitable for training builds.

09Workshop basics

Simple parametric originals built in this workshop before the curated collection above existed. They print and they work, but where a vetted community design above covers the same intervention, start there.

Parametric cricothyrotomy trainer preview
In this repo

Parametric cricothyrotomy trainer

Surgical cricothyrotomy

Half-shell larynx and trachea on a strap plate with palpable thyroid notch, proud cricoid ring, and an open cricothyroid membrane window. Tape or a gelatin skin patch covers the window and is cut during training. OpenSCAD source included; every dimension is a named parameter.

Print: PLA or PETG, 0.2 mm layers, 3 perimeters, no supports. Prints flat.
Original design for this repository

cric_trainer.scad (3.1 KB) · cric_trainer.stl (213.6 KB)

Suture practice tension frame preview
In this repo

Suture practice tension frame

Wound closure, suturing

Two-part clamping frame that stretches any skin analog flat over cone-tipped posts, with membrane swap in seconds. Works with glove rubber, silicone sheet, foam, or chicken skin. OpenSCAD source included.

Print: Print suture_frame_base.stl and suture_frame_top.stl, one each. PLA, 3 perimeters, no supports.
Original design for this repository

suture_frame.scad (1.6 KB) · suture_frame_base.stl (139.1 KB) · suture_frame_top.stl (102.8 KB)

Wound packing trainer preview
In this repo

Wound packing trainer

Hemorrhage control, wound packing

Two-piece dowel-pinned block with a deep wound tract, narrow entry over a wide internal pocket with a lateral extension, and a bleeder channel for surgical tubing from an IV bag. Opens for cleaning and gelatin relining. OpenSCAD source included.

Print: Print wound_half.stl twice and wound_peg.stl four times. PLA, 2 perimeters, 10% infill, no supports.
Original design for this repository

wound_half.stl (301.2 KB) · wound_peg.stl (18.6 KB) · wound_trainer.scad (2.1 KB)

Rib frame for needle decompression and finger thoracostomy preview
In this repo

Rib frame for needle decompression and finger thoracostomy

Needle decompression, finger thoracostomy

Three-part press-fit rib frame with open space beneath, so a correct entry passes into free air. Cover with foam, gelatin, or pork belly as the chest wall. OpenSCAD source included.

Print: PLA, 3 perimeters, no supports. Print 2 rails and 3 rib bars; all parts print flat.
Original design for this repository

rib_bar.stl (11.4 KB) · rib_frame.scad (2.3 KB) · rib_rail.stl (3.0 KB)

Vessel phantom mold box preview
In this repo

Vessel phantom mold box

Ultrasound-guided vascular access

Open-top mold box with V-notches on both end walls at three staggered depths. Lay tubing across, pour gelatin, and get a vascular phantom with vessels at roughly 10, 20, and 30 mm below the surface in one block. OpenSCAD source included.

Print: PLA or PETG, 3 perimeters, no supports, prints upright.
Original design for this repository

mold_box.scad (1.6 KB) · mold_box.stl (11.2 KB)

IO trainer, proximal tibia block preview
In this repo

IO trainer, proximal tibia block

Intraosseous access

Stylized proximal tibia block with tuberosity landmark. Slicer settings create the bone feel, with perimeters as cortex and sparse infill as cancellous bone. OpenSCAD source included.

Print: PLA, 2 perimeters, 8-12% gyroid infill, no supports. Perimeter count sets cortex thickness.
Original design for this repository

io_trainer.scad (1.4 KB) · io_trainer.stl (587.7 KB)

10Wanted: designs that don’t exist yet

Interventions with no open-source printable trainer anywhere, swept across MakerWorld, Printables, Thingiverse, NIH 3D, GrabCAD, Cults3D, and the open simulation literature. Design one and it has a home here.

Wanted

Tourniquet application limb

Only TQ holsters and commercial silicone legs exist. A printable limb (or mold) with enough circumference and compressibility to teach real windlass tension has not been published anywhere.

Swept November 2026 — nothing open exists yet.

Wanted

Chest seal application surface

Commercial wearable trainers exist (TrueClot, Mountain Man), but no printable chest surface with an open or sucking wound for seal placement and burping drills.

Swept November 2026 — nothing open exists yet.

Wanted

Lateral canthotomy trainer (printed)

Published models are hybrids - gelatin eyes, ping-pong balls, and rubber bands in an existing face model. The JETem gelatin eye recipe listed under Head & spine is the best open resource; a purpose-built printable orbit with cantholysis feedback does not exist.

Swept November 2026 — nothing open exists yet.

Wanted

Nasogastric tube trainer

No open printable head/esophagus trainer for NG passage. University capstone projects exist on paper only.

Swept November 2026 — nothing open exists yet.

Wanted

Obstetric trainers (delivery, perineal repair, PPH)

Published 3D-printed perineal repair molds trace back to purchased base meshes, so nothing is openly redistributable. A from-scratch open perineum mold or PPH tamponade trainer would be first of its kind.

Swept November 2026 — nothing open exists yet.

Wanted

Fasciotomy / escharotomy limb

Military programs use proprietary trainers (SIMETRI). The open literature has gelatin-and-tubing builds (JETem escharotomy innovation, CC BY) but no printable layered-limb files.

Swept November 2026 — nothing open exists yet.